油溶緩蝕劑HY-10

緩蝕劑介紹

油溶緩蝕劑HY-10是由多種成膜有機胺和其他複配物複合而成，此型号是原劑。

HY-10特有的五元含氮雜環能以靜電引力和大π鍵形式吸附⛱️在金屬表面。一方面改變金屬表面的電荷分布和界面性質，使金屬表面的能量狀态趨于穩定🔆化，減低腐蝕反應；另一方面由于非極性基團緊密💃排列在金✂️屬表面形成一層疏水膜，使腐蝕反應得到抑制；同時它在金屬表面可以改變氫離子的氧化還原電位，也可以絡合溶液中的某些氧化劑，減低電位達到緩蝕👄的目的。HY-10含有沉澱🛀🏻成膜組分，能夠及時修複由沖刷等原因造成的膜損☀️傷。整體表現爲成膜牢固，緩蝕優異。

HY-10具有緩蝕率高、使用量少、耐高溫、環境友好、應用廣泛等特點。

油田油氣管線輸送使用廣泛；

煉油廠各裝置：常減壓系統、催化裂化系統、焦化加氫系統等使🐪用廣泛。

 

HY-10性能指标

 

Item	Targeted Value
Appearance	Reddish brown liquid
Density（25℃）g/cm3	0.95 ~ 1.05
PH（1%water solution）	7~9
Dispersity	Soluble in oil
Flash point	>61℃
Condensation point	<-8℃
Main ingredients	≥99%

使用方法

1.可原液注入或用溶劑油均勻稀釋後注入。

2.按系統處理量的5-10ppm注入；前期注入量爲正常期的2-4倍❤️，三天後每天依次按3ppm的速度遞減至正常使用量。

3.本劑冬天使用時，可适當用蒸汽加熱。

包裝與儲存

1.     200L塑料桶，IBC桶

2.     宜放置陰涼通風處。不可靠近明火、酸堿類和氧化劑類化工品。

 

操作注意事項

3.     操作人員應穿戴乳膠手套及防護眼鏡等防護品。

4.     如遇本物觸及皮膚時可用大量水沖洗後再用肥皂洗✂️淨即可；如遇本物品濺入眼睛請在現場立即用水充分清洗之後立即就醫檢查。

5.     如遇火災，可用幹粉、泡沫、CO2 等滅火器以及黃砂滅火。

 Oil Soluble Corrosion Inhibitor HY-10

About HY-10

The oil-soluble corrosion inhibitor HY-10 is composed of a variety of film-forming organic amines and other complex compounds. This model is the original agent. 

The HY-10's unique five-yuan nitrogenous heterocycles will adhere to the metal surface in the form of electrostatic attraction and large PI bonds.On the one hand, the charge distribution and interface properties of the metal surface are changed to stabilize the energy state of the metal surface and reduce the corrosion reaction.On the other hand, the non-polar groups are closely arranged on the metal surface to form a hydrophobic film, which inhibits the corrosion reaction.At the same time, it can change the REDOX potential of hydrogen ions on the metal surface, and can also complexate some oxidants in the solution to reduce the potential for corrosion inhibition.HY-10 contains precipitated film forming components, which can timely repair film damage caused by erosion and other reasons.The overall performance of the film is firm,

HY-10 has the characteristics of high corrosion inhibition rate, low consumption, high temperature resistance, environmental friendliness and wide application.

Oil and gas pipelines are widely used in oil fields.

Refinery equipment: atmospheric and vacuum pressure system, catalytic cracking system, coking hydrogenation system and other widely used.

HY-10 Performance Index

Items	Targeted Value
Appearance	Reddish brown liquid
Density（25℃）g/cm3	0.95 ~ 1.05
Dispersity	Soluble in oil
Flash point	>61℃
Condensation point	<-8℃
Matter content	≥95%

How to use

1. It can be injected with the original liquid or uniformly diluted with solvent oil.

2. 5-10ppm injection according to the system processing capacity;The amount of injection in the early stage was 2-4 times of that in the normal stage, and then decreased to the normal usage at the rate of 3ppm every day after 3 days.

Packaging & amp; storage

1. 200L plastic barrel, IBC ton barrel.

2. It is advisable to place a cool and ventilated place. Not close to open fire, acid and alkali and oxidizer chemicals.

Operational considerations

1. Operators should wear latex gloves and protective glasses and other protective products.

2. If the object touches the skin when you can rinse with a lot of water and then wash it with soap, if this item splashes into the eyes, please immediately after the use of water in the site to fully clean the medical examination.

3. In case of fire, can be used dry powder, foam, CO-----2 and other fire extinguishers and yellow sand fire extinguishing.